Request a callback
- Have a question? Leave your number and we'll call you back
Request callbackProduct code: PD304LM-A
Our PD304 is a single plate play detector designed to fit lifts with front recesses. The single-phase control panel neatly mounts to the lift post (nearside or offside) and the baseplate to the platform recess. The innovative single plate design allows movement in both rotational and lateral directions, thus meeting all UK DVSA requirements in a single unit.
Using either of our two rugged handheld torch controls (wired or wireless), the operator can easily check for wear and play in all steering and load-bearing components.
Note: PD304 can only be used on lifts where the lift manufacturer has tested and approved. OEM enquiries welcome.
Boston products & software are designed in-house by our team of experts. All equipment is manufactured in the UK & Europe.
With over 35 years of experience & more than 4000 premises using our products, we have the expertise to advise you on all your workshop needs.
Specifications: | |
---|---|
Power: | 1 Phase 230V / 50 Hz / 13A |
Motor: | 0.75 kW |
Electronics: | Microprocessor Controlled |
Operating Pressure: | 150 bar |
Weight and Build - Pedestal: | 18 k g - Steel panel construction |
Weight and Build - Floor Unit: | 45 kg - Steel construction |
Max Design Load: | 1500 kg |
Floor Unit Chassis Dimensions: | 605 x 600 x 45 mm [L x W x H] |
Pedestal Control Dimensions: | 800 x 150 x 196 mm [L x W x H] |
Communication: | Serial / wireless FM / direct PLC connection |
Operator Control: | Remote hardwired torch / RF torch |
Our PD304 is a single plate play detector designed to fit lifts with front recesses. The single-phase control panel neatly mounts to the lift post (nearside or offside) and the baseplate to the platform recess. The innovative single plate design allows movement in both rotational and lateral directions, thus meeting all UK DVSA requirements in a single unit.
Using either of our two rugged handheld torch controls (wired or wireless), the operator can easily check for wear and play in all steering and load-bearing components.
Note: PD304 can only be used on lifts where the lift manufacturer has tested and approved. OEM enquiries welcome.
Specifications: | |
---|---|
Power: | 1 Phase 230V / 50 Hz / 13A |
Motor: | 0.75 kW |
Electronics: | Microprocessor Controlled |
Operating Pressure: | 150 bar |
Weight and Build - Pedestal: | 18 k g - Steel panel construction |
Weight and Build - Floor Unit: | 45 kg - Steel construction |
Max Design Load: | 1500 kg |
Floor Unit Chassis Dimensions: | 605 x 600 x 45 mm [L x W x H] |
Pedestal Control Dimensions: | 800 x 150 x 196 mm [L x W x H] |
Communication: | Serial / wireless FM / direct PLC connection |
Operator Control: | Remote hardwired torch / RF torch |